The hose clamp is a device that is used for securing the hose to various features, such as other hoses or connection points on machines, in order to prevent the hose from leaking. A hose clamp can be used in a variety of situations including outdoor projects, plumbing and automotive environments. Large hose clamps are also available for bigger sealing projects, and stainless hose clamps are available for more cosmetic applications. Hose clamps can also be used for applications around the house such as organizing wires and securing fixtures.
When using a hose clamp, turn the screw counter clockwise to loosen it. Then, slide the clamp over the hose and the feature the clamp will be used for. Turn the screw clockwise to tighten it. It is important to use a screwdriver when tightening and loosening the clamp to ensure that it is properly secured and will not release under pressure. Also, if sliding the clamp onto the hose proves difficult, the screw can be loosened all the way, which allows the clamp to the opened and placed around the hose rather than sliding it on.
It is important to make sure that the barb the hose clam attaches to is smooth and has no nicks, dents or cracks. If the barb is damaged, it may affect the security of the clamp and allow the hose to leak. If the hose is stuck, never cut it to get it out. Doing so may damage the barb.
Hose clamps are typically used for low pressure liquid applications. They are most commonly found in automotive settings, attaching the various hoses within the engine to their counterparts. Leaky fluid within a vehicle can have damaging outcomes. Therefore, it is crucial that the clamps be as tight as possible. This can be done by attaching the clamp to the barb rather than just sealing it. In this setting, the hose clamp is expanded to fit over the raised part of the barb.
Get more on this here: hoseclampkings.com